Shengfan GFRC production process

6. Product packaging transport

.Computer Programming:Factory carving master according to CAD drawings, in accordance with the requirements of customers and drawings marked above the size of the preparation of computer programs.Need to carve the general are the shape of the site, can not use the plate to achieve the site.

.Engraving machine engraving mold : The engraver to write a good program into the computer, three-dimensional CNC engraving machine began to automatically engrave the mold.General carving materials are mainly wood, gypsum, foam.

.Mold assembly production
The basic process of mold making is as follows :
1.Line---
2.Open material---
3.Set the table---
4.Fill ash mold, paint---
5.Binding---
6.To QC ---

.The type of mold:
1. Wood mold --- the number of use, can be directly made of wood negative mold (using 20-50 times)
2. Silicone mold --- cost expensive, mainly used for carving, easy stripping (using 20-30 times)
3. FRP --- the use of more than the cost of wood than your (use 100-200 times)
4. Gypsum mold --- use less (use 2-3 times)
5. Cement mold

.Product jet production : GRC produ ction process there are two, one is the hand paste process, the other is the spray process.I produced all the products, all of the spray process production.The spray process is the GRC industry standard designation process.The quality and strength of the products produced by the spray process are several times or even several times more than the hand-paste process.
The main steps of the spray process are as follows :
1.Cleaning mold
2.Playing off the oil
3.Open material
4.Sprayed
5.Back light